Cabinet brief
Inset gallery lives in the CRT bezel above; buy desk offsets over the editorial title rail — arcade glow, hard rules, corner brackets.
Level notes
Hard ruleDescription
Use these to jumper from any female header on any board
We carry this same display in yellow
Every three holes are connected with a 20mil trace
Lead-free solder is a bit harder to use (does not flow as well)
This is just your basic reversible screwdriver - pocket sized
SparkFun Button Pad 2x2 - Breakout PCB Buttons/Switches Video Surveillance Use these to jumper fromThis a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad. Now with footprints for diodes! Use the super cheap 1N4148 through hole diodes. These can be used to isolate the switches to make for a bit easier decoding. Documents:
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy